Copyright ©2007 Rissler R&D Inc. . Reproduction of material without permission is strictly prohibited.
Website Development by Chromium Gothic Studios 2007. www.chromiumgothic.com
MOE console installation image 1
Installation console image Thumb
Installation Image Armrest Thumb
Installation Image Seat thumb
Installation Options
Console        Armrest         Seat

Installation Method 1 (Console)

This Installation Method is the most common and often preferred for vehicles such as Trucks, Vans and mid to full size Cars.

This installation method assumes sufficient room between seats for unit placement. Aprox 71/2in to 8in are required depending on seat configuration and malleability. If sufficient room does not exist try using Seat method.

Steps for Installation (not including sizing the cradle for laptop)

Steps:

  1. Place MOE Base unit on Console top
  2. Hook Strap hooks under edge of Console
  3. Cinch Straps until Firm without distortion of edges
  4. Locate Cradle onto Base and Install Laptop

Installation Method 2 (Armrest)

This Installation Method is often used for vehicles such as Trucks, Vans and mid to full size Cars. Advantage of this method is the retention of full access to console storage.

This installation method assumes sufficient room between seats for unit placement. Aprox 71/2in to 8in are required depending on seat configuration and malleability. If sufficient room does not exist try using Seat method.

Steps for Installation (not including sizing the cradle for laptop)

Steps:

  1. Place MOE Base unit on Armrest top
  2. Hook Strap hooks into opposite side of Base unit while encircling the Armrest
  3. Cinch Straps until Firm with only moderate compression of Armrest covering
  4. Locate Cradle onto Base and Install Laptop

Installation Method 3 (Passenger Seat)

This Installation Method is available for almost every vehicle including Small and Compact cars, Sports cars and small mid size Cars. This method allows retention of all center console storage and makes installation in closely spaced vehicles possible.

Requires an open passenger seat

Steps for Installation (not including sizing the cradle for laptop)

Steps:

  1. Place MOE Base unit on Passenger Seat
  2. Hook Strap hooks onto fore and aft edges of lower seat unit
  3. Cinch Straps until Firm with only moderate compression of Seating area
  4. Locate Cradle onto Base and Install Laptop
Choose Image for individual information